oreohuge.blogg.se

1. Ace hardware store replace a screen on screen door free#
2. Ace hardware store replace a screen on screen door windows#

RELATED: So, You Want to… Screen In a Porch STEP 5: Trim away excess screen material and re-install the door in the frame.

Ace hardware store replace a screen on screen door free#

This time I put lightweight clamps on the corners to hold the screen in place and placed my free hand firmly on the frame to keep the mesh from shifting.

So I carefully pulled out the spline and screen, re-seated the screen on the frame, and tried again. Then, starting at one corner, I used the concave end of the spline roller to gently push the spline and screen into the metal groove.īefore I’d gone too far though, I realized the mesh wasn’t going in evenly. I unrolled the new fiberglass screen onto the door, making sure to overlap all of the edges. Photo: STEP 4: Use a spline roller to push the replacement spline and screen into the door groove. Once I had removed the old spline and the ripped screen, I thoroughly cleaned the door frame. I inserted the tip of the screwdriver in one corner of the door frame and pried out the old spline material with the pliers, being careful not to bend the metal edges of the groove. RELATED: The Best Retractable Screen Doors for the Home STEP 3: Remove the existing spline and thoroughly clean the door. For a small job or single use, the plastic version is fine if you have multiple door and window screens to replace, you may want to purchase the wooden tool.Īrmed with my materials, I headed home and assembled a few more tools, including a skinny regular screwdriver, needle-nose pliers, regular pliers, and a utility knife with a fresh blade. I chose the narrowest gauge, because the pet mesh was a thicker screen and I wanted to make sure that it would fit securely in the existing groove.īefore I began work, there was one more specialized tool that I needed-a spline roller, the tool I would use to fit the spline into the groove of the door (available on Amazon).

Ace hardware store replace a screen on screen door windows#

Custom Built Screens for Doors and Windows We custom build screens to your window or door frame measurements so they fit precisely. Simply bring in the damaged screen and we’ll repair or replace it at our store. Sold in rolls and available in different widths and two colors, the spline inserts between the screen mesh and a narrow groove along the edge of the door frame. We can repair or replace any window, patio or door screen. The next choice was in screen spline-flexible tubing that holds the screen in place.

The standard patio-door-size roll measures 36×84″, although both larger and smaller rolls are available. There are also a couple of specialty fabrications, including wire mesh with smaller holes designed to block out “no-see-ums” and a heavier-duty fiberglass “pet” option.Īlthough our old screen was wire, I decided to try the pet-friendly fiberglass. The key materials and tools, including screening, spline, and spline roller.